Danolyte® is a metastable, aqueous solution, that is generated through an electrolytic process. Unlike traditional electrolysis with saline solution, Danolyte® maintains high activation energy that brings about an accelerated disinfection process.
Danolyte’s® active ingredient, hypochlorous acid, is produced at 500 ppm and has a much greater biocidal effect than commonly used chlorine bleach due to Danolyte’s® high ORP (Oxidation-Reduction Potential) of> 900mV.
The activity of hypochlorous acid as a bactericide is greatly superior to that of the sodium hypochlorite (Bleach) being almost 100 times more powerful. Manipulating the pH is the secret behind our proprietary technology. Hypochlorous Acid produced onsite from a Danolyte Global Automatic Hypochlorous Acid Onsite Generation Systems typically has a pH of 6.5. At this pH, more than 90% of the free available chlorine is HOCl, less than 10% OCL- and no CL2 are formed. The concentration of Free Available Chlorine (FAC) is 500+ PPM.
Hypochlorous acid carries no electrical charge, it moves quickly, oxidizing bacteria in a matter of seconds, while the hypochlorite ion bleach might take up to a half-hour to do the same. Germ surfaces carry a negative electrical charge which results in a repulsion of the negatively charged hypochlorite ion (bleach)to the area of the germ surfaces, making hypochlorite ion less effective at killing germs. Hypochlorous acid’s lack of electrical charge allows it to more efficiently penetrate the protective barriers surrounding germs.
Fully Automated
Continuously adjusting for product quality.
Microcontroller
Operates on 110v for plug and play reduces labor cost by eliminating operator monitoring
Remote Monitoring
Ability to troubleshoot and perform maintenance remotely
Invented To Disinfect The Way You Need
Works Great in a Variety of Disinfectant Applications
Neutral pH is non-corrosive and fully compatible with water systems
For more information on how to purchase generator for onsite generation, please provide information below and a representative from Danolyte Global will contact you.
Danolyte has demonstrated effectiveness against viruses similar to SARS-CoV-2 on hard porous and/or non-porous surfaces. Therefore, Danolyte can be used against SARS-CoV-2 when used in accordance with the directions for use against Adenovirus Type 1, on hard, porous/non-porous surfaces. Refer to the CDC website at www.cdc.gov/outbreaks or OEI website at https://www.oie for additional information.
Danolyte® is a metastable, aqueous solution, that is generated through an electrolytic process. Unlike traditional electrolysis with saline solution, Danolyte® maintains high activation energy that brings about an accelerated disinfection process.
Danolyte’s® active ingredient, hypochlorous acid, is produced at 500 ppm and has a much greater biocidal effect than commonly used chlorine bleach due to Danolyte’s® high ORP (Oxidation-Reduction Potential) of> 900mV.
The activity of hypochlorous acid as a bactericide is greatly superior to that of the sodium hypochlorite (Bleach) being almost 100 times more powerful. Manipulating the pH is the secret behind our proprietary technology. Hypochlorous Acid produced onsite from a Danolyte Global DJIT system typically has a pH of 6.5. At this pH more than 90% of the free available chlorine is HOCl, less than 10% OCL- and no CL2 are formed. The concentration of Free Available Chlorine (FAC) is 500+ PPM.
Hypochlorous acid carries no electrical charge, it moves quickly, oxidizing bacteria in a matter of seconds, while the hypochlorite ion bleach might take up to a half hour to do the same. Germ surfaces carry a negative electrical charge which results in a repulsion of the negatively charged hypochlorite ion (bleach)to the area of the germ surfaces, making hypochlorite ion less effective at killing germs. Hypochlorous acid’s lack of electrical charge allows it to more efficiently penetrate the protective barriers surrounding germs.
The Danolyte® Difference
Danolyte’s® advantages over traditional disinfection fluids and systems:
EPA Registered disinfectant highly effective against E. Coli, Pseudomonas, Enterococcus, C. Diff- spore, and Staphylococcus
Active ingredient derived from naturally occurring salt minerals and water
